第一次插上没什么,开机分区等弄好,心想重启一下
结果重启就悲惨了,应该不是驱动问题,不知道什么问题
- Sep 30 15:06:25 h kernel: megaraid_sas 0000:0c:00.0: FW now in Ready state
- Sep 30 15:06:25 h kernel: megaraid_sas 0000:0c:00.0: 32 bit DMA mask and 32 bit consistent mask
- Sep 30 15:06:25 h kernel: megaraid_sas 0000:0c:00.0: firmware supports msix#011: (0)
- Sep 30 15:06:25 h kernel: megaraid_sas 0000:0c:00.0: current msix/online cpus#011: (1/4)
- Sep 30 15:06:25 h kernel: megaraid_sas 0000:0c:00.0: RDPQ mode#011: (disabled)
- Sep 30 15:06:25 h kernel: megaraid_sas 0000:0c:00.0: Failed to init firmware
- Sep 30 15:06:25 h kernel: megaraid_sas 0000:0c:00.0: Failed from megasas_init_fw 5792
复制代码
- [ 6.627163] megasas: 07.707.50.00-rh1
- [ 6.627268] megaraid_sas 0000:0c:00.0: enabling device (0000 -> 0002)
- [ 6.633207] megaraid_sas 0000:0c:00.0: Waiting for FW to come to ready state
- [ 28.655137] megaraid_sas 0000:0c:00.0: FW now in Ready state
- [ 28.655156] megaraid_sas 0000:0c:00.0: 32 bit DMA mask and 32 bit consistent mask
- [ 28.655912] megaraid_sas 0000:0c:00.0: irq 33 for MSI/MSI-X
- [ 28.655981] megaraid_sas 0000:0c:00.0: firmware supports msix : (0)
- [ 28.655992] megaraid_sas 0000:0c:00.0: current msix/online cpus : (1/4)
- [ 28.656001] megaraid_sas 0000:0c:00.0: RDPQ mode : (disabled)
- [ 28.677136] megaraid_sas 0000:0c:00.0: Failed to init firmware
- [ 28.677313] megaraid_sas 0000:0c:00.0: Failed from megasas_init_fw 5792
复制代码
河北网友:换个阵列看看看
福建网友:昨天用的9212-4i4e也是初始失败,加载超时。今天换了H310 也是这样【今天还加载成功了一次】,win下一切正常
海南网友:很久没摸过SAS2008的卡了
只是随便玩玩或者性价比的话 搞个SAS2208的卡吧, 不差钱就弄个SAS3316之类的12G卡。
安徽网友:自己搭建的NAS,SAS2208 卡大概多少钱。。
吉林网友:1G缓存带电容款的看了下淘宝也4-500的样子。
tb上一堆堆的拆机。
未经允许不得转载:美国VPS_搬瓦工CN2 GIA VPS » 求助机房大佬阵列卡问题