Ikoula I3-8100 评测_美国VPS_搬瓦工CN2 GIA VPS

和之前1欧云IP差不多都是109开头的。

———————————————————————-
CPU model : Intel(R) Core(TM) i3-8100 CPU [url=home.php?mod=space&uid=175]@[/url] 3.60GHz
Number of cores : 4
CPU frequency : 3353.247 MHz
Total size of Disk : 228.0 GB (4.2 GB Used)
Total amount of Mem : 7685 MB (108 MB Used)
Total amount of Swap : 1023 MB (0 MB Used)
System uptime : 0 days, 0 hour 5 min
Load average : 0.11, 0.04, 0.02
OS : CentOS 7.6.1810
Arch : x86_64 (64 Bit)
Kernel : 3.10.0-957.21.3.el7.x86_64
———————————————————————-
I/O speed(1st run) : 395 MB/s
I/O speed(2nd run) : 402 MB/s
I/O speed(3rd run) : 433 MB/s
Average I/O speed : 410.0 MB/s
———————————————————————-
Node Name IPv4 address Download Speed
CacheFly 205.234.175.175 102MB/s
^C

复制代码

新硬盘

smartctl 6.5 2016-05-07 r4318 [x86_64-linux-3.10.0-957.21.3.el7.x86_64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, http://www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: CT250MX500SSD1
Serial Number: 1919E200F21F
LU WWN Device Id: 5 00a075 1e200f21f
Firmware Version: M3CR023
User Capacity: 250,059,350,016 bytes [250 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-3 T13/2161-D revision 5
SATA Version is: SATA >3.2 (0x1ff), 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Mon Jul 29 14:28:50 2019 CEST
SMART support is: Available – device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 30) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x0031) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 100 000 Pre-fail Always – 0
5 Reallocated_Sector_Ct 0x0032 100 100 010 Old_age Always – 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always – 277
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always – 8
171 Unknown_Attribute 0x0032 100 100 000 Old_age Always – 0
172 Unknown_Attribute 0x0032 100 100 000 Old_age Always – 0
173 Unknown_Attribute 0x0032 100 100 000 Old_age Always – 0
174 Unknown_Attribute 0x0032 100 100 000 Old_age Always – 2
180 Unused_Rsvd_Blk_Cnt_Tot 0x0033 000 000 000 Pre-fail Always – 29
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always – 0
184 End-to-End_Error 0x0032 100 100 000 Old_age Always – 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always – 0
194 Temperature_Celsius 0x0022 065 060 000 Old_age Always – 35 (Min/Max 0/40)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always – 0
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always – 0
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline – 0
199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always – 0
202 Unknown_SSD_Attribute 0x0030 100 100 001 Old_age Offline – 0
206 Unknown_SSD_Attribute 0x000e 100 100 000 Old_age Always – 0
210 Unknown_Attribute 0x0032 100 100 000 Old_age Always – 0
246 Unknown_Attribute 0x0032 100 100 000 Old_age Always – 63246979
247 Unknown_Attribute 0x0032 100 100 000 Old_age Always – 1074557
248 Unknown_Attribute 0x0032 100 100 000 Old_age Always – 7051
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Completed [00% left] (0-65535)
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.